Prof. LU Jian 呂堅教授
Chair Professor of Mechanical Engineering
Vice-President (Research & Technology)
Director of Centre for Advanced Structural Materials
City University of Hong Kong
香港城市大學
機械工程講座教授
副校長(研究及科技)
先進結構材料研究中心主任
Prof. Jian LU is Chair Professor of Mechanical Engineering; Vice-President (Research & Technology) and Dean of graduate study at the City University of Hong Kong (CityU). He obtained the Dip. Ing., Master (DEA) degree and Doctoral degree from University of Technology of Compiegne in 1984 and 1986 respectively. From 1986 to 1994, he was appointed as Senior Research Engineer at the CETIM (French Technical Centre for Mechanical Industry). In 1994, he was appointed as Professor; Head of Department of Mechanical Systems Engineering and Director of Mechanical Systems and Concurrent Engineering Laboratory jointly supported by the French Ministry of Education and CNRS at the University of Technology of Troyes, France. From 2005 to 2010, he was Chair Professor and Head of Department of Mechanical Engineering at the Hong Kong Polytechnic University. From 2010 to 2013, he was the Dean of College of Science and Engineering at CityU. From 2013 till now, he serves as the Vice-President (Research & Technology) and Dean of Graduate Studies of CityU.
Professor LU’s primary research interest is advanced materials and its integration in mechanical and biomedical systems using the combination of experimental mechanics and mechanical simulation. He has also branched out into several other areas of interest including surface engineering, biomechanics, residual stresses, and mechanics of nanomaterials. He has published more than 350 SCI journal papers including papers in Nature (cover story), Science, Nature Materials, Nature Communications, Materials Today, Advanced Materials, PRL, Acta Materialia, and Journal of the Mechanics and Physics of Solids. He received the French Knight of the National Order of Merit and French Knight of the National Order of Légion d’Honneur in 2006 & 2017 respectively. Both awards were nominated by the President of the Republic of France and awarded by the French Government. He was elected as the 1st Chinese-born French Fellow by the National Academy of Technologies of France among 300 Fellows in 2011.
呂堅講座教授,香港城市大學副校長,研究生院院長,先進結構材料研究中心主任,香港力學學會前理事長。1978年考入北京大學,1979年獲國家獎學金赴法留學。1986年到1994年在法國機械工業技術中心(CETIM)工作,歷任高級工程師,實驗室負責人。1994年到2005年在法國特魯瓦技術大學任教授,機械系統工程系系主任(1994-2005),1994年到2005年任法國教育與研究部與法國國家科學中心(CNRS)機械系統並行工程實驗室主任,1999 年由法國教授全國委員會晉升法國機械,土木,力學領域最年輕的一級教授。2005年到2010年在香港理工大學機械工程系任講座教授,系主任。2010年到2013年任香港城市大學科學與工程學院院長。 2013年至今任香港城市大學主管科研,大陸事務的副校長,兼任研究生院院長。
研究範疇主要包括航空航太材料與結構預應力工程,先進及納米材料的製備與力學性能,生物與仿生材料(多穩態結構,柔性機器人)力學,先進材料與產品集成設計。呂教授曾經任由空客,EADS,SNECMA,ABB,FIAT等十八家公司與研究所大學參加的歐盟專案首席科學家。中科院瀋陽金屬所客座首席科學家,北京科技大學,東北大學,南昌大學名譽教授,西安交通大學,西北工業大學顧問教授,上海交通大學,中南大學,上海大學等校客座教授。研究成果在Nature(封面文章), Science, Nature Materials, Advanced Materials, Materials Today, Nature Communications, PRL, JMPS, Acta Materials 等 SCI 雜誌上發表 350 篇論文。 2006年及2017年分別獲法國政府授予法國國家榮譽騎士勳章和法國國家榮譽軍人團騎士勳章。2011年被法國國家技術科學院選為院士,成為該院近三百名院士中首位華人院士。
主页:https://www.cb.cityu.edu.hk/cityseminar/past/20171012/bio.html
|
|